Some Preparations of Building a Bench Seat – If you have the carpentry skill to build wooden furniture, it will be a great benefit. Some furniture is excellent in designs and finish but is made of low quality material. Therefore, those who have the skills should only follow building a bench seat steps and create their own furniture.

Cheap furniture is sometimes made with bad carpentry that it has a bad durability at the same time. Therefore, it is will be recommended to create a bench in high quality designs and excellent materials with DIY projects and ideas.

However, people need to be sure that they have the determination and passion in completing the project. Even for a small project of a bench seat, people need to get ready with a strong willingness to complete it.

Some Preparations of Building a Bench Seat

Tool list:

  1. Saw: circular saw, miter saw
  2. Nail gun: we will need to use finish nail gun, micro pin nail gun, and screw gun
  3. Pencil and chalk box
  4. Hammer
  5. And 2’ level


  1. sanded face plywood: 3/4″
  2. corner trim: 2x4s
  3. wood screws: 1-1/2″
  4. baseboard trim
  5. speed square
  6. wood putty: 1/4″ x 1″
  7. wood glue
  8. paint or other desired finishing

How to start the project:

The first thing that we should do is to look around and find a space. It will be fabulous to have a bench that stands back a window. It is important to make a bench facing an area with bright lighting so we can use the bench for various functions.

As we find a space to place the bench, we have to measure the size of the bench that we are about to build. The blend has to blend the window and space well to provide stunning impressions.

Next, we have to decide whether we want a padded bench or a simple wooden bench. Besides, it is also important to determine if we want to build an attached bench or the one that is moveable.

In addition to the size, we need to determine the depth of the bench and if we want to use the inside space as storage. Building a bench seat can be that complicated if we want to get a flawless result.

Draw up the Sketch

A plan is one of the most crucial stages in building a bench seat. By drawing the sketch correctly, we will be able to make the outcome perfect. The common size is 47″ wide, 20″ deep and 20″ tall.

Additionally, we can use the standard size: 1/4″ x 4″ t&g bead board. The edge trim should be with the standard size of 1/4″ x 3/4″.

We can find high quality, precise, and detail sketch on a bench seating plan online. We do not have to start the sketch from the start because we can use the standard size above.

After finding the right plan sketch, we can purchase high quality materials of wood and anything. The results will be awesome if we do it carefully and wholeheartedly.

Leave a Comment